See FixLens results before your first diagnosis

Your washer cannot drain water properly. Here is why and what to do next.

1. 1Clean the pump filter - this blockage is the most common cause.
2. 2Check the drain hose for kinks, pinches, or obstructions.
3. 3If the code returns after cleaning, the drain pump may need professional service.

Typical question: Can I try this myself before calling a technician?

The dishwasher has detected water in the base tray, so the anti-flood protection has stopped normal operation.

1. 1Turn the dishwasher off and close the water supply before restarting it.
2. 2Check around the door seal, inlet hose, and drain path for visible leaks.
3. 3Do not keep forcing resets because standing water can damage internal components.

Typical question: What should I do first if water is already in the tray?

This scenario points to poor airflow through the dryer. In many cases the fix starts with cleaning rather than repair.

1. 1Clean the lint filter completely, not just the visible surface layer.
2. 2Inspect the condenser and lower airflow path for dust build-up.
3. 3Restart after cleaning and only escalate if the warning returns quickly.

Typical question: Which parts can I safely clean myself?

The control system is not seeing the expected defrost-heater response, so ice build-up and cooling problems may follow.

1. 1Move sensitive food if temperature stability is already dropping.
2. 2Avoid repeated resets because they can hide a hardware issue without fixing it.
3. 3This is usually a technician job involving the heater, sensor, or wiring path.

Typical question: Can I reset it and keep using it for a few more days?