FixLens

Error code · Hoover

E4 · Excessive foam or water

This error indicates that there is too much foam and/or water in the machine. Check if you have added an excessive amount of detergent or used an unsuitable detergent for washing machines.

Washing machineCaution — Know When to StopFixLens verified
Get a full diagnosisHow FixLens verifies data

Safe first steps

  1. Check the amount of detergent used. If you have added more than the recommended amount, reduce it for the next wash.
  2. Ensure you are using a detergent suitable for washing machines. If you are using hand-washing detergent, switch to a machine-specific detergent.
  3. Run a rinse cycle without any laundry to clear excess foam and water from the drum.

When to stop

  • If the error persists after following the steps above, and you notice water leaking from the machine, stop using it and call a professional.

Likely cause

This error indicates that there is too much foam and/or water in the machine. Check if you have added an excessive amount of detergent or used an unsuitable detergent for washing machines.

Verification

Reviewed by: automated manual extraction

Verified against Hoover AWMFD 410AMR/1-S technical documentation

FixLens publishes its own structured technical logic verified against Hoover AWMFD 410AMR/1-S documentation · last verified April 21, 2026.

Official manufacturer support