FixLens

Error code · Hotpoint

E02 · Water cut error

The appliance has detected a water cut error. Check the water supply network and ensure the filter is not clogged.

DishwasherCaution — Know When to StopFixLens verified
Get a full diagnosisHow FixLens verifies data

Safe first steps

  1. Check the water supply to ensure the valve is open.
  2. Disconnect the dishwasher from the power supply.
  3. Disconnect the water inlet hose from the dishwasher.
  4. Inspect and clean the water inlet filter to remove any blockages.
  5. Reconnect the water inlet hose and power supply, then test the appliance.

When to stop

  • Stop if you see water leaking from the connections — risk of flooding

Likely cause

The appliance has detected a water cut error. Check the water supply network and ensure the filter is not clogged.

Verification

Reviewed by: automated manual extraction

Verified against Hotpoint HDI LYM A5 R technical documentation

FixLens publishes its own structured technical logic verified against Hotpoint HDI LYM A5 R documentation · last verified April 23, 2026.

Official manufacturer support