FixLens

Error code · Mora

F45 · Distribution valve fault

This indicates a fault with the distribution valve. First, clean the coarse and fine filters and check if the external filter on the inlet hose is clogged.

DishwasherCaution — Know When to StopFixLens verified
Get a full diagnosisHow FixLens verifies data

Safe first steps

  1. Turn off the dishwasher and unplug it from the power outlet.
  2. Shut off the water supply to the dishwasher.
  3. Unscrew the inlet hose from the dishwasher.
  4. Carefully remove the external filter from the inlet hose and clean it.
  5. Reinstall the external filter, ensuring the seal is properly positioned, and reattach the inlet hose.

When to stop

  • Stop if you see water leaking from the inlet hose or connections — risk of flooding.

Likely cause

This indicates a fault with the distribution valve. First, clean the coarse and fine filters and check if the external filter on the inlet hose is clogged.

Verification

Reviewed by: automated manual extraction

Verified against Mora IMB6675 technical documentation

FixLens publishes its own structured technical logic verified against Mora IMB6675 documentation · last verified April 23, 2026.