FixLens

Error code · Whirlpool

E1 · Drainage issue detected

The appliance is unable to drain water, possibly due to a clogged filter or a kinked drain hose. Check and clean the filter and ensure the drain hose is not bent.

DishwasherCaution — Know When to StopFixLens verified
Get a full diagnosisHow FixLens verifies data

Safe first steps

  1. Check the drain hose for kinks or bends.
  2. Remove and clean the drain filter to ensure it is not clogged.
  3. Inspect the spray arms for any food debris that may block water flow.
  4. If the drain filter is damaged or the issue persists after cleaning, arrange a service visit — do not run the appliance.

When to stop

  • Stop if you see water leaking from the appliance — risk of flooding.

Likely cause

The appliance is unable to drain water, possibly due to a clogged filter or a kinked drain hose. Check and clean the filter and ensure the drain hose is not bent.

Verification

Reviewed by: automated manual extraction

Verified against Whirlpool W7F HS41 X technical documentation

FixLens publishes its own structured technical logic verified against Whirlpool W7F HS41 X documentation · last verified April 23, 2026.

Official manufacturer support